PSI supplies special Compakt-Seals on customer demand like: - multiple cable seals - special shapes like oval or square - double seal for PIPE - portable water qualities - etc. Centre and support the carrier pipe in core drilled hole. The elastomer seal insert is grouted against the inner pipe cable and against the core-drilled hole or the wall sleeve by stainless steel flange plates placed at the front. Fire Dampers Protecta FR Damper is used to fire proof ventilation ducts where they penetrate fire rated constructions such as fire compartments and fire walls, preventing the passage of fire and smoke both surrounding and inside the ventilation duct. The material used in the plate reacts immediately to fire through the heat and fills up the box, preventing the spread of fire, smoke and gases through the apertures made for wall boxes and for the penetration of conduits and cables in flexible walls. Analysis of the particular requirements.
Advance Products and Systems wall sleeves are designed to mate with the Advance Innerlynx seals for leak free performance. Simply remove any dirt. The principal applications are pre-insulated pipe, particularly PE-jacket and flexible pipes for district heating systems. The thickness of a layer should be approx. Remarks make sure that the carrier pipe, the wall and the WGKK Seal during the application are dry as well as free of grease and dust when laid into the ground the WGKK Seal must be covered before backfilling with an expansion cushion e.
Flomec, Inc. - Products - Pipe Seal & Wall Penetration Products
Products Career Opportunities Contact Sitemap. It is extremely effective and therefore economical. Follow Us Facebook Twitter. The principal applications are pre-insulated pipe, particularly PE-jacket and flexible pipes for district heating systems. Simply remove any dirt. Pipe-Seal ZWR — with layered ring inlays.
The seals are available as single-layered as well as a double-layered rubber segments; both sealed against pressing water. PSI Labyrinth sealing rings are pushed on to the pipe and cast in the centre of the wall. Weather and Physical Damage Protection. By choosing the correct model and number of links, the PipeSeal belt will expand when wrench tightened to fill the gap and create a seal. Apply pressure plate centered to core bore hole and mark drilled holes and after that drill into marks and insert dowels. Protecta FR ASF is a non-expanding fire-rated acrylic sealant for sealing joints in service penetrations to prevent the spread of fire, smoke and gases. The PipeSeal provides an economincal and sure method of sealing pipes and conduit through walls and floors for 20 psig.